電氣成套設計根據客戶的不同要求，根據本廠的產品特點，進行開關柜成套組成設計，并根據客戶要求對其中一些元件等設施進行設計調整。好的電氣成套是認真設計出來的！為什么會這么說呢？

　　According to the different requirements of customers, according to the characteristics of our products, complete switchgear design, and according to the requirements of customers to some of the components and other facilities for design adjustment. A good electrical set is carefully designed! Why do you say that?

　　好的電氣成套是設計出來的，有規范，有設計，要明確地正確地落實到圖紙上，才能讓成套加工方給做出來，設計工程師不要抱怨下面的成套加工方沒做好，而是先要審視自己有沒有把圖紙設計好。

　　A good electrical complete set is designed, there are norms and designs, to be clearly and correctly implemented on the drawings, in order to let the complete set of processing party to make, design engineers do not complain about the following complete set of processing party did not do well, but first to look at their own drawings have been designed.

　　設計工程師要做好與電氣成套加工方的溝通工作，尤其是新圖紙，遍布置安裝好能親臨現場，看看實際排布與設計是否相符合，聽取現場工人的建議，避免閉門造車，有時圖紙看上去很順眼，但實現布置卻不合理，甚至造成加工接線的難度，這時有經驗的工人師傅的建議的建議就很有參考價值，要及時聽取建議盡快做出修改，切記不要貪圖省事兒放手不管，也不要一意孤行死不悔改。

　　Design engineers to do a good job of communication and electrical complete sets of processing, especially the new drawings, for the first time arrangement installation is best can attend, to see if the actual configuration and design, listening to the advice of field workers, avoid behind closed doors, sometimes the drawings to look pleasing to the eye, but achieve layout is unreasonable, even cause the difficulty of processing terminal, At this time the advice of experienced workers is very valuable, to timely listen to the advice to make changes as soon as possible, remember not to save things to let go, do not stubbornly unrepentant.

　　要形成一套適合自己的成套加工工藝和規范，養成成套加工按圖施工的良好習慣，分清權限與責任，圖紙錯了設計工程師負責，沒按圖制作成套加工方負責。嚴格出廠驗收制度，嚴格按圖驗收，與圖不符即返工。每次及時總結設計與成套加工上的經驗教訓，留下總結紀要，供下次類似的設計做參考及改進。

　　To form a set of suitable for their own complete set of processing technology and norms, develop a good habit of complete set of processing according to the drawing construction, distinguish authority and responsibility, drawings wrong design engineer is responsible for, not according to the drawing production complete set of processing party responsible. Strict factory acceptance system, strictly according to the drawing acceptance, inconsistent with the drawing rework. Summarize the experience and lessons of design and complete processing in time each time, and leave summary notes for reference and improvement of similar design next time.

　　即使在加工成套的過程中，設計工程師有條件也應多下車間，關心自己設計的正在被加工成套的電氣柜，與現場的成套加工方多溝通：掌握生產加工的進度；及時發現并解決現實生產中遇到的問題或一些細節處理方面的問題(尤其是線槽蓋板還沒有蓋上的時候)；有條件多拍攝一些電氣柜在不同加工成套階段的照片，留下圖片資料，供后續設計上的對比分析參考改進之用。

　　Even in the process of processing complete sets, the design engineer should also be more under the workshop, care about their own design is being processed complete sets of electrical cabinet, and more communication with the field complete set of processing party: master the production and processing progress; Timely find and solve the problems encountered in real production or some of the details of the problem (especially the slot cover is not covered); It is possible to take more photos of electrical cabinets in different processing stages and leave pictures for reference and improvement in subsequent design.

　　有時候電氣成套在設計過程中或者使用過程中出現問題，比如說設計不合理，不美觀，不安全，所以在剛開始設計工作時就要考慮好。更多內容就來網站m.bjzmxm.cn咨詢吧！

　　Sometimes electrical complete sets in the design process or the use of the process of problems, such as unreasonable design, not beautiful, not safe, so in the beginning of the design work to consider good. More content to the website m.bjzmxm.cn consultation!